REATEC® Temperature-Indicators Standard Strips
The standard strips have been designed for use under normal, clean and dry conditions which ensure that the indicator elements do not get in contact with grease, oils, solvents or moisture. Contact with these substances could lead to a fake color change.
The self- adhesive strip with 10 elements measure 5 x 95 mm (can be supplied non-adhesive). The grading increments of the indicators range between 3-7°C; increments of 2°C can be supplied for part segmentation (see table).
| Table Ranges Standard (subject to change) |
Strips with narrow increments not available as P-Type |
REATEC® Type P Temperature-Indicator Strips
Are protected against unwanted influences such as moisture and grease. Ranges P01, P1A, P02, P2A and P03 are fully sealed.(20 x 105mm)
Ranges P3A, P04 and P41 will be fully sealed only if the covering adhesive foil measuring 25 x 105 mm is carefully stuck on a clean surface. (25 x 110mm)
Type P indicator strips are less sensitive to compression. They are therefore particularly suitable for applications on presses, calendar cylinders, etc.
Strips with narrow increments are not available in Type P.
Table Ranges Type P
(subject to change)
